Technical specification 

Standard model:

Description

1.Designed working condition: Baromatric P=1.004c×10⁵Pa (753mmHg), dry-bulb temperature φ=31.5℃,wet-bulb temperature =28 ℃.

2.Standard model hydraulic inlet temperature t1=37℃,output water temperature t2=32℃

3.Hydraulic pressure of tower inlet is measured from the tower foot at the bottom of cooling tower.

4.The parameters above are common use combination of multifans,you can also use other combinations such as 600m³/h, besides DF-200×3,DF-100×6,DF-150×4,DF-300×2,DF-600×1 are also available.

5.We can make special designment for customer's demands.You may conatct with our technical department of specific dimension.

Technical specification 

Moderate temperature model:

Description

1.Designed working condition: Baromatric P=1.004c×10⁵Pa (753mmHg), dry-bulb temperature φ=31.5℃,wet-bulb temperature =28 ℃.

2.Moderate temperature model hydraulic inlet temperature t1=43℃,output water temperature t2=33℃

3.Hydraulic pressure of tower inlet is measured from the tower foot at the bottom of cooling tower.

4.The parameters above are common use combination of multifans,you can also use other combinations such as 600m³/h, besides DF-200×3,DF-100×6,DF-150×4,DF-300×2,DF-600×1 are also available.

5.We can make special designment for customer's demands.You may conatct with our technical department of specific dimension.

Basic appearance

Note:

1.DN1 is water input pipe diameter,DN2 for effluent pipe diameter,DN3 is over flow pipe diameter,DN4 is water filler pipe diameter,DN5 is discharge waste pipe diameter.

2.All water input and output Flan Adopts PN1.Mpa (GB 119.2-88).

3."n" indicates tower's number.