PART 1 , General introduction :

EPS Decoration is new building material for exterior wall decoration , Instead of GRC system ,because of easier design ,fast production, light , easy mount:

There have two main parts application in the market:

Project 1, Cornice for windows and wall edges,Roman column as well as Arch doors/windows  

 PART 2: main parts of production line

1,  Composing of production line:

Material for coating and painting:

Client need prepared, or seller assist to supply those material .

Project 1:

1, Expandable polystyrene Block, density 16g/l -20g/l, Good fusion. About for Engraving machine, The super fusion block are required.

2, Cement and sand strength above 42.5Mpa, water, cement and sand: 19%,29.7%,50% other additives.

3, Grid net :Fabric grid net:5×5mm,4×4mm, Improve the impact enhanced surface.self -adhesive type.

4, shelf for cornice drying (it should be dried by nature or less than 35 degree hot air)  

The material for EPS parts mount : Adhesive mortar

 PART3, Details of production line

Project one

1, Dry mortar mixer system

Type: GB-DM01

Automatic loading , two cement mix tank for continuous working

Including: 2 screw feeding machine(3kw*2),1 mixer(7.5kw),finished product stock bin,1 single-spout packing machine(4kw),1 duster(1.5kw),1 electric control cabinet.

Total power:22.5kw

Mixing volume:1.5m³

Output:3-5t/h

Overall size:4800*3200*3500mm

Strong point:

1, Twin screw for agitation , one screw knife for cutting fiber

2, close set de-duster with automatic clean system.

3, automatic weighing and loading system.

2,  EPS CNC Cutter machine

CNC cutter machine

Type: GB-FC200

Max cutting size: 2000mm width x 2500mm length x 1300mm height .

Multi-wire :

With 15 cutting wires. One cutting table

2D Computer controlled profile cutter .

High Accuracy :

X.Y all by controlled by step motor with screw rode movement.( 4 sets of step motor and screw rod for seperate controls)  

Easy software : (Directly open Autocad drawings for cutting )

The drawings software is Autocad . You can use CAD file directly

Cutting software is designed by supplier. Both are English version.

Power : 220v, 50HZ /2N .6kw

Include the following main parts:

1, With cutter table, movable shelf

2, control box and computer.

3, With remote manual adjustment controller

2 Manual Arch and round special shape cutting  GB-AC90

This cutter will be used for the set of Roman column, round shape , door or window Arch and so on.

Working table size:900*900

4, Automatic Wet mortar mixer system  Type:GB-WM01

Automatic loading , certain water level setting , two cement mix tank for continuous working

Total power : 12 kw, 380v,50hz.

Over size : 2400L*1200W*3500Hmm

With belt conveyor for automatic feeder for coating machine.

PLC control for automatic running, Weighing scale for water and powder for exact mixing .

4-1) Manual wet motar mixer  Type: GB-WM02M

Pump speed: 940R/Min

Power;2.2KW

130kg wet mixer system.

With motor and time relayer controll for lift mixing ,which will keep more even mix.

5, Coating machine

Type:GB-C100

Power:380v, 3kw

Coating speed:4m/min Speed is controlled by frequency converter

Thickness of coating:3-4mm

Max size of EPS cornice: length 3 meter width 1m,height:0.6m

Weight:800kg

Over size of machine:7000 length* 1800width*1600 height

Special :

1) conveyer belts and chain together for movement.

2) Stainless steel chamber and conveyor roller for more accuracy and long time

3, guide rod for chamber , which is easy adjustment and accuracy

4, guide rod for conveyor table . easy opertion and accuracy

5) waste tank for easy clean and better envirment  

6) Trimming machine  TYPE:GB-T100

Cutter diameter: DN1000

Power: 4kw, 380v, 50HZ

Overall size: 2200x1400

Overall weight: 400kg

7) cornice drying frame and fiber glass operation table

7-1)Cornice drying frame

Made by Gv profile steel , size 2mx2 meter with wheel for movement.

7-2)fiber glass operation table  ( it is only for cement base cornice)

Table size : 3meter x2 meter